Characterization and physicochemical aspects of novel cellulose-based layered double hydroxide nanocomposite for removal of antimony and fluoride from aqueous solution


Authors / Editors


Research Areas

No matching items found.


Publication Details

Output type: Journal article

UM6P affiliated Publication?: Yes

Author list: Bessaies H., Iftekhar S., Asif M.B., Khriji J., Necibi C., Sillanpää M., Hamrouni B.

Publisher: Elsevier

Publication year: 2021

Journal: Journal of Environmental Sciences (1001-0742)

Volume number: 102

Start page: 301

End page: 315

Number of pages: 15

ISSN: 1001-0742

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85092928141&doi=10.1016%2fj.jes.2020.09.034&partnerID=40&md5=4b22c7a3b5584528a919987aeb526579

Languages: English (EN-GB)


View in Web of Science | View on publisher site | View citing articles in Web of Science


Abstract

A series of novel adsorbents composed of cellulose (CL) with Ca/Al layered double hydroxide (CCxA; where x represent the Ca/Al molar ratio) were prepared for the adsorption of antimony (Sb(V)) and fluoride (F−) ions from aqueous solutions. The CCxA was characterized by Fourier-transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), elemental analysis (CHNS/O), thermogravimetric analysis (TGA-DTA), zeta potential, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) analysis. The effects of varying parameters such as dose, pH, contact time, temperature and initial concentration on the adsorption process were investigated. According to the obtained results, the adsorption processes were described by a pseudo-second-order kinetic model. Langmuir adsorption isotherm model provided the best fit for the experimental data and was used to describe isotherm constants. The maximum adsorption capacity was found to be 77.2 and 63.1 mg/g for Sb(V) and F−, respectively by CC3A (experimental conditions: pH 5.5, time 60 min, dose 15 mg/10 mL, temperature 298 K). The CC3A nanocomposite was able to reduce the Sb(V) and F− ions concentration in synthetic solution to lower than 6 μg/L and 1.5 mg/L, respectively, which are maximum contaminant levels of these elements in drinking water according to WHO guidelines. © 2020


Keywords

No matching items found.


Documents

No matching items found.


Last updated on 2021-06-12 at 23:16